SureStep IP65-rated high-torque stepper motors are completely protected from solids and dust ingress and from low-pressure waterjets from any direction. These fully sealed, single-shaft motors are available with industry-standard NEMA 17, 23 and 34 mounting flanges and provide holding torque from 61 to 1,288 oz-in. The motors use two-phase technology with 200 full steps per revolution, or 1.8° per full step. Waterproof white epoxy coating on the motor laminations and special bearings and seals keeps moisture out of the motor. The motors are available in single-shaft configurations and have a 1-ft cable and locking connector.